Skip to content
Anything Metal

Wrought iron driveway gates, made to suit.

Motorised or manual, sliding or swing. Crafted in our Sydney workshop, from Australian materials by hand.

Let's build your gate

Swing and sliding gates.

Your design or ours, from heritage scrollwork to clean modern bars.

Black wrought iron driveway gates with scrollwork between sandstone pillars, made by Anything Metal

Swing gates.

Single or double, manual or automated.

White wrought iron sliding driveway gate with vertical bars on a track beside a matching white picket fence, made by Anything Metal

Sliding gates.

Where there's no room for a gate to swing.

Wrought iron pedestrian gate with wavy bars and a leaf design between sandstone walls, made by Anything Metal

Pedestrian gates.

Alongside the driveway gates, or on their own.

Welding a custom wrought iron security door in the Anything Metal workshop

Why people choose us.

Crafted in our Sydney workshop and hung by the same team. Hot-dip galvanising where the gate needs it, then marine-grade primer and paint. Plug-and-play motors fitted by us where there is power at the gate, the wiring by your licensed electrician.

  • Fixed price in writing.
  • No imported kits. All custom, in Australian steel.
  • You deal directly with the fabricator.

Tell us about your gate.

A photo, rough sketch or quick description is plenty.

  • Free fixed-price quote
  • Same-day reply, Mon to Fri
  • We stand by our work

Common questions.

How much do wrought iron driveway gates cost?

It depends on size, design and finish. Send a photo of the entrance and we'll come back same day with a fixed price.

Should I choose a swing or sliding driveway gate?

Swing gates suit most entrances. Sliding gates are for tight entrances and steep driveways where a swing gate won't fit. We'll look at your driveway and tell you which suits.

Can you make a driveway gate to match my fence or an existing gate?

Yes. Send us a photo and we'll copy the pattern, from heritage scrollwork to clean modern lines. We also make matching fence panels, garden and side gates.

How long does it take to build and install a driveway gate?

Lead times vary with the size of the build and the workshop schedule. You'll get the current lead time with your same-day quote. Automated gates may need a little extra time to fit and set up the motor.

What finishes are available for driveway gates?

Primed and finished in marine-grade paint, all handled in-house. We'll recommend hot-dip galvanising where your gate needs the protection. Colour matching is available at extra cost, and an exact match needs a physical sample we can send to our paint supplier.

Do I need council approval for a driveway gate?

Often, yes, in a conservation area or on a heritage-listed home. We know what councils ask for, and we'll tell you what yours will want.

Do automated driveway gates need a dedicated power supply or extra electrical work?

Yes, any motorised gate needs power at the motor. You will need a licensed electrician to run a dedicated circuit from the meter board out to the gate. We supply and fit the motor once the power is there.

Can driveway gates take intercoms, keypads or remote access?

The motors we use can take intercoms, keypads, remotes and safety beams. These are wired in and set up by your licensed electrician, not by us.

How wide do driveway gates need to be to fit two cars in Sydney?

It depends on the driveway. We measure the actual entry and build the gates to fit, so older homes with narrower entries still get a proper gate. Send a photo and a rough width and we'll tell you what suits.

Do you make and install driveway gates in the Eastern Suburbs and North Shore?

Yes. Every gate is made in our Sydney workshop and installed by the same team, from Surry Hills out to Vaucluse and from Mosman up to Wahroonga.

Didn't find your answer? Ask us. Same-day reply, Mon to Fri.